You will need:
– Tin can opener
– A small, round tin can
– Scissors
– Ruler
– Pencil
– Fine-point black marker
– Craft foam or construction paper
– White glue
– Low-temp glue gun
– 12mm wiggle eyes
– Feathers
– Wire
Instructions:
1. Cut the top off the tin can using a tin can opener.
2. Cut the can in half using scissors.
3. Measure and mark 1 inch down from the top of one of the can halves using a ruler and pencil.
4. Draw a half-circle shape around the mark using a fine-point black marker.
5. Cut out the half-circle shape using scissors.
6. Repeat steps 3-5 for the other can half.
7. Cut a 6-inch piece of wire.
8. Bend the wire into a U-shape.
9. Glue the two can halves together, lining up the cut edges.
10. Glue the wire U-shape to the top of the owl’s head.
11. Glue wiggle eyes to the front of the owl’s head.
12. Glue feathers to the back of the owl’s head.
13. Let the glue dry.
Contents
How do you make an owl out of aluminum cans?
Making an owl out of aluminum cans is a fun and easy project, and it can be done with materials that you likely have lying around the house. Here’s how to do it:
1. Start by sorting your cans into two piles: large and small. The large cans will be used for the owl’s body, and the small cans will be used for the owl’s wings.
2. Cut the large cans into two pieces: a circular bottom and a rectangular top. The bottom should be about twice as wide as the top.
3. Use the bottom piece as a template to cut out six circles from the small cans.
4. Glue the small circles to the top piece of the large can, making sure that they are evenly spaced.
5. Use the top piece of the large can as a template to cut out a circular piece from the middle of the rectangular top.
6. Glue the circular piece to the top of the owl’s head.
7. To create the owl’s eyes, cut out two small circles from the leftover rectangular top piece and glue them in place.
8. Use a black marker to draw on the owl’s eyebrows, mouth, and nose.
9. To finish, spray the owl with a coat of clear sealant to protect it from rust.
What can I make from a tin can?
There are many things you can make from a tin can. Tin cans are made of metal, so they are a good material for making things out of. Here are some examples of things you can make from a tin can.
One thing you can make from a tin can is a lamp. You can make a lamp by cutting a tin can in half and then drilling a hole in the top of the can. You can then put a light bulb in the hole and use the can as a lamp.
Another thing you can make from a tin can is a wind chime. You can make a wind chime by drilling holes in a tin can and then putting beads or other decorations in the holes. You can then hang the tin can from a tree or from a porch.
You can also make a bird feeder from a tin can. You can make a bird feeder by cutting a tin can in half and then drilling a hole in the bottom of the can. You can then put a piece of wire through the hole and use the wire to hang the bird feeder from a tree. You can then put bird food in the bird feeder.
You can also make a pencil holder from a tin can. You can make a pencil holder by cutting a tin can in half and then drilling a hole in the top of the can. You can then put a pencil in the hole.
You can also make a cup from a tin can. You can make a cup by cutting a tin can in half and then drilling a hole in the bottom of the can. You can then put a piece of wire through the hole and use the wire to hang the cup from a tree. You can then put water in the cup.
You can also make a knife from a tin can. You can make a knife from a tin can by cutting the can into a shape that looks like a knife. You can then use the knife to cut things.
So, as you can see, there are many things you can make from a tin can.
How do you Modge podge tin cans?
Modge Podge (or Mod Podge) is a decoupage medium used to adhere paper to surfaces. It can be used to cover or protect surfaces, or to create a decorative finish. Tin cans are a great surface to use for Modge Podge projects because they are sturdy and have a clean, smooth finish.
To Modge Podge a tin can, start by cleaning the surface of the can with a damp cloth. Then, cut out a piece of paper that is slightly larger than the surface of the can. Apply a thin coat of Modge Podge to the surface of the can and place the paper on top. Smooth out any wrinkles or bubbles and let the Modge Podge dry. Once the Modge Podge is dry, apply a second coat. Let the Modge Podge dry completely before using the can.
How do you punch holes in tin cans?
There are many ways to punch holes in tin cans. One way is to use a can opener to make a small hole in the top or side of the can. You can then use a nail or a screwdriver to punch holes in the can. Another way to punch holes in a tin can is to use a hammer and a nail. You can also use a drill to punch holes in a can.
How do you make tin can flowers?
Making tin can flowers is a fun and easy way to recycle old tin cans. You can use any size tin can, but a smaller can will work better.
You will need:
tin can
hot glue gun
glue sticks
scissors
flowers (or other embellishments)
1. Cut the top off the tin can.
2. Cut the bottom off the tin can.
3. Cut the can in half.
4. Glue the two halves of the can together.
5. Glue the flowers (or other embellishments) to the top of the can.
6. Let the glue dry.
7. Display your tin can flowers.
How do you make a rose out of a tin can?
Making a rose out of a tin can is a fun, easy, and creative way to recycle a tin can. This project is perfect for kids and adults of all ages. There are many different ways to make a rose out of a tin can, but the following tutorial will show you the easiest way.
What you need:
-A tin can
-A pencil
-A pair of scissors
-A ruler
-A metal file
-A drill with a small bit
-Paint (optional)
1. Use a pencil to draw a spiral on the side of the tin can.
2. Cut out the spiral with a pair of scissors.
3. Use a ruler to measure the length of the spiral.
4. Use a metal file to smooth out the edges of the spiral.
5. Drill a small hole in the center of the spiral.
6. Paint the tin can (optional).
7. Use a drill with a small bit to make a hole in the bottom of the tin can.
8. Insert a piece of wire into the hole in the bottom of the tin can.
9. Twist the wire around a pencil to create a spiral.
10. Cut the wire with scissors.
11. Insert the spiral into the hole in the top of the can.
12. Twist the spiral to secure it in place.
13. Your rose is now complete!
What kind of paint do you use on tin cans?
There are a few different types of paint you can use on tin cans. If you are looking for a permanent paint that will not chip or peel, then you should use a spray paint that is made for metal. You can find this type of paint at most hardware stores. Another option is to use a enamel paint. This type of paint can be used on both metal and plastic, and it will create a hard and durable finish. If you are looking for a paint that will be easy to remove, then you can use a spray adhesive and then a spray paint made for plastic. This will create a temporary finish that can be easily removed with a little bit of rubbing alcohol.
