With just a few basic supplies, you can make your own easy bird feeder! This is a great craft for kids, and it’s a fun way to help out your local birds.
To make a bird feeder, you’ll need:
– A jar or container
– A piece of wire
– A spoon
– birdseed
Start by filling your jar or container with birdseed. Then, use the spoon to make a small hole in the top of the container. Wind the wire around the top of the container to create a hanger, and then twist the ends of the wire together to secure it.
Your bird feeder is now ready to hang in your backyard! Be sure to place it in a spot where you can see it easily, so you can enjoy watching the birds feed.
Contents
How do you make a simple bird feeder?
Making a bird feeder is a fun and easy way to attract birds to your yard. There are many different types of bird feeders that you can make, but this article will show you how to make a simple bird feeder using a recycled plastic bottle.
You will need:
– A recycled plastic bottle
– A sharp knife
– A drill
– A screwdriver
– A wire hanger
– bird seed
1. Cut the top off of the plastic bottle using a sharp knife.
2. Drill a hole in the bottom of the bottle.
3. Screw the wire hanger into the hole in the bottom of the bottle.
4. Fill the bottle with bird seed.
5. Hang the bird feeder in a sunny spot in your yard.
Enjoy watching the birds feed from your new bird feeder!
How do you make a simple bird feeder for kids?
Making a bird feeder is a fun activity that both kids and adults can enjoy. Not only is it a great way to get outside and enjoy nature, but it’s also a great way to help birds in your area. There are a few different ways to make a bird feeder, but this guide will show you how to make a simple feeder using a few easy-to-find materials.
What you’ll need:
– A container (such as a milk carton, a plastic container, or a paper towel tube)
– A knife or scissors
– Bird seed
– A spoon
– A ruler or a tape measure
Step 1: Cut a small hole in the lid or the top of your container. This will be the hole that the birds will eat from.
Step 2: Use a spoon to fill your container with bird seed.
Step 3: Use a ruler or a tape measure to find the center of the top of your container.
Step 4: Cut a small hole in the center of the top of your container. This will be the hole that the birds will exit from.
Step 5: Cut a small hole in the side of your container. This will be the hole that the birds will enter from.
Your bird feeder is now ready to use! Place it in a spot where you can see it from your window, and enjoy watching the birds visit.
How do you make a bird feeder for a school project?
Making a bird feeder for a school project is a fun way to learn about birds and how they live. It is also a great way to get outside and enjoy nature. You can make a simple bird feeder out of a few materials that you probably have around the house.
The first step is to gather the supplies you will need. You will need a sturdy container, such as a small plastic container or a milk carton. You will also need a small hole punch, some string or ribbon, and some bird food.
The next step is to cut a hole in the top of the container. You will want to make sure the hole is large enough for the birds to fit their heads through. Then, use the hole punch to make a few small holes in the bottom of the container. This will allow the bird food to fall out when the feeder is tipped over.
Finally, tie a piece of string or ribbon to the top of the container, and hang it from a tree or a porch. Fill the container with bird food, and wait for the birds to come!
What can I make bird feeders out of?
There are many things you can make bird feeders out of. You can make them out of wood, plastic, or metal.
If you want to make a wooden bird feeder, you will need a piece of wood that is at least 24 inches long and 6 inches wide. You will also need a drill, a saw, a screwdriver, some screws, and some wood glue.
First, drill a hole in the center of the wood board. This hole should be big enough for the bird feeder tube to fit through.
Next, use the saw to cut the board into two 12-inch pieces.
Then, use the screwdriver to attach the two pieces of wood together. You can do this by drilling a hole in each piece of wood and then using a screw to attach them together.
Finally, use the wood glue to attach the bird feeder tube to the top of the bird feeder.
If you want to make a plastic bird feeder, you will need a piece of plastic that is at least 18 inches long and 6 inches wide. You will also need a drill, a saw, a screwdriver, and some screws.
First, drill a hole in the center of the plastic board. This hole should be big enough for the bird feeder tube to fit through.
Next, use the saw to cut the board into two 9-inch pieces.
Then, use the screwdriver to attach the two pieces of plastic together. You can do this by drilling a hole in each piece of plastic and then using a screw to attach them together.
Finally, use the screws to attach the bird feeder tube to the top of the bird feeder.
If you want to make a metal bird feeder, you will need a piece of metal that is at least 18 inches long and 6 inches wide. You will also need a drill, a saw, a screwdriver, and some screws.
First, drill a hole in the center of the metal board. This hole should be big enough for the bird feeder tube to fit through.
Next, use the saw to cut the board into two 9-inch pieces.
Then, use the screwdriver to attach the two pieces of metal together. You can do this by drilling a hole in each piece of metal and then using a screw to attach them together.
Finally, use the screws to attach the bird feeder tube to the top of the bird feeder.
How can I make a cheap bird feeder?
There are a few ways that you can make a cheap bird feeder. One way is to take a plastic bottle and cut a hole in the bottom. Then, take a piece of wire and twist it around the neck of the bottle. The birds can then perch on the wire and eat the seed from the bottle.
Another way to make a cheap bird feeder is to use a piece of pipe. Cut a hole in one end of the pipe and then fill it with seed. The birds can then perch on the edge of the pipe and eat the seed.
You can also make a cheap bird feeder out of a piece of wood. Cut a hole in the center of the wood and then fill it with seed. The birds can then perch on the edge of the wood and eat the seed.
Finally, you can make a cheap bird feeder out of a piece of cloth. Cut a hole in the center of the cloth and then fill it with seed. The birds can then perch on the cloth and eat the seed.
All of these methods are cheap and easy to make, and they will help you to attract birds to your backyard.
How do you make a bird feeder step by step?
Making a bird feeder is a fun and easy project that can be completed in just a few hours. There are many different ways to make a bird feeder, but the most common type is a simple tube feeder.
To make a tube bird feeder, you will need the following supplies:
– 1-2 feet of 1/2 inch PVC pipe
– PVC cement
– A cap for the top of the pipe
– A drill
– A saw
– A screwdriver
– A hammer
– Birdseed
1. Cut the PVC pipe to the desired length with a saw.
2. Apply PVC cement to one end of the pipe and attach the cap.
3. Drill a hole in the center of the cap.
4. Insert a screwdriver into the hole and turn it clockwise to create a hole in the cap.
5. Apply PVC cement to the other end of the pipe and attach a metal hanger.
6. Hammer a nail into the top of the pipe and hang the feeder from the nail.
7. Fill the feeder with birdseed.
That’s it! Your bird feeder is now ready to use.
How do you get bird seed to stick together?
One of the most popular bird foods is bird seed. It is easy to find and many birds love it. However, one challenge with bird seed is that it can often come apart or scatter when birds try to eat it. This can make it difficult for birds to get the food they need and can also create a mess.
There are a few ways to help bird seed stick together. One is to add a small amount of peanut butter to the bird seed. This will help the seeds stick together and make it easier for birds to eat. Another option is to put the bird seed in a mesh feeder. This will help keep the seed together and also make it easier for birds to access.
If you are not using a mesh feeder, you can also help keep the bird seed together by spraying it with a water mist. This will help the seeds stick to each other and will make it less likely for them to scatter.
Whichever method you choose, be sure to keep the bird feeder clean and filled with fresh seed to ensure that your birds have a healthy and enjoyable diet.”
