Bird Feeder Craft For Kids
Kids can have a lot of fun making a bird feeder to put in their backyard. The best part is that they can get creative with the design and make it their own.
There are a few different ways to make a bird feeder, but the most common is to use a jar or bottle. The easiest way to do this is to use a large jar or bottle with a wide mouth.
The first step is to wash and dry the jar or bottle. Next, you will need to cut a piece of screen or metal mesh that is large enough to cover the opening of the jar or bottle.
You will then need to staple the mesh to the inside of the jar or bottle. This will create a place for the birds to stand while they eat.
The final step is to fill the jar or bottle with bird food. You can either use a scoop or a funnel to do this.
Once the bird feeder is finished, you can hang it in a tree or somewhere else in your backyard. Make sure to check the bird feeder regularly to refill it with food.
Contents
- 1 How do you make a simple bird feeder for kids?
- 2 How do you make a bird feeder for a school project?
- 3 How do you make a bird feeder out of recycled materials?
- 4 How do you make a bird feeder without peanut butter for kids?
- 5 How do you make a bird feeder out of a plastic bottle for kids?
- 6 How do you make a bird feeder step by step?
- 7 How do you make a preschool bird feeder?
How do you make a simple bird feeder for kids?
Making a bird feeder is a fun and easy way to attract birds to your backyard. You can make a simple bird feeder for kids with a few supplies from your local craft store.
To make a bird feeder, you will need:
– A wooden dowel or a stick
– A piece of wood that is at least 12 inches long and 2 inches wide
– A drill
– A saw
– A screwdriver
– A small piece of wire
– Bird seed
1. Drill a small hole in the center of the wood block.
2. Cut the dowel or stick to a length of 10 inches.
3. Screw the dowel or stick to the center of the wood block.
4. Cut a small hole in the top of the dowel or stick.
5. String a piece of wire through the hole.
6. Tie a small bag of bird seed to the end of the wire.
7. Hang the bird feeder in a tree or on a porch.
How do you make a bird feeder for a school project?
Making a bird feeder is a fun and easy school project. You will need the following supplies:
– a plastic bottle
– a knife
– bird seed
– a screwdriver
1. Cut the plastic bottle in half with the knife.
2. Use the screwdriver to make a small hole in the bottom of the bottle.
3. Pour the bird seed into the bottle.
4. Use the screwdriver to make a small hole in the top of the bottle.
5. Put the top of the bottle back on and screw it in place.
6. Put the bird feeder in a place where you can see it from your window.
The birds will love the fresh bird seed and you will love watching them eat it.
How do you make a bird feeder out of recycled materials?
Making a bird feeder out of recycled materials is a fun, easy, and environmentally friendly way to help birds in your area. There are many different ways to make a bird feeder out of recycled materials, so you can choose the one that best suits your needs and interests.
One way to make a bird feeder out of recycled materials is to use a used plastic bottle. Cut the bottle in half and then use a hot glue gun to attach a small metal ring to the top of the bottle. Next, fill the bottle with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
Another way to make a bird feeder out of recycled materials is to use a used jar. Cut the jar in half and then use a hot glue gun to attach a small metal ring to the top of the jar. Next, fill the jar with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
You can also make a bird feeder out of recycled materials by using a used paper towel or toilet paper tube. Cut the tube in half and then use a hot glue gun to attach a small metal ring to the top of the tube. Next, fill the tube with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
If you have a used plastic milk jug, you can use it to make a bird feeder. Cut the jug in half and then use a hot glue gun to attach a small metal ring to the top of the jug. Next, fill the jug with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
You can also make a bird feeder out of recycled materials by using a used plastic soda bottle. Cut the bottle in half and then use a hot glue gun to attach a small metal ring to the top of the bottle. Next, fill the bottle with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
Finally, you can make a bird feeder out of recycled materials by using a used cardboard box. Cut the box in half and then use a hot glue gun to attach a small metal ring to the top of the box. Next, fill the box with bird seed and use a wire hanger to hang it from a tree or other sturdy surface.
How do you make a bird feeder without peanut butter for kids?
Making a bird feeder without peanut butter is a fun, easy project that kids will love. You will need:
-A clean, empty plastic container with a lid (milk jug, juice carton, etc.)
-A small nail
-A hammer
-Scissors
-A piece of wire (coat hanger, wire shoe hanger, etc.)
-A bird seed mix
1. Cut a small hole in the lid of the plastic container.
2. Hammer a small nail through the hole.
3. Cut a piece of wire about 18 inches long.
4. Twist one end of the wire around the nail.
5. Twist the other end of the wire around a pencil.
6. Turn the pencil so the wire wraps around it a few times.
7. Cut the wire off the pencil.
8. Pour the bird seed mix into the container.
9. Put the lid on the container.
10. Hang the feeder in a tree or on a fence.
Your bird feeder is now ready to use!
How do you make a bird feeder out of a plastic bottle for kids?
Making a bird feeder out of a plastic bottle for kids is a fun, easy project that can be completed in just a few steps.
To make a bird feeder out of a plastic bottle for kids, you will need:
– a plastic bottle
– a pair of scissors
– a pen or a marker
– some string or wire
– bird seed
First, cut the bottom off of the plastic bottle using scissors. This will be the bottom of the feeder.
Next, use a pen or a marker to draw a design on the bottle. You can make any design you want – a simple flower or a tree are good options.
When you have finished drawing the design, use a pair of scissors to cut it out.
Now, use some string or wire to hang the feeder from a tree or a fence.
Finally, fill the feeder with bird seed and wait for the birds to come!
How do you make a bird feeder step by step?
Making a bird feeder is a fun and easy project that can be completed in just a few steps. You will need a few simple supplies, including a feeder tube, a screw top, a metal hanger, and bird seed.
The first step is to fill the feeder tube with bird seed. You can either use a funnel to make this easier, or you can simply fill it up by shaking the tube.
Next, screw the top of the feeder onto the tube. Make sure that it is tight so that the seed does not fall out.
Finally, hang the feeder in a spot where birds will be able to see it. You can use a metal hanger for this, or you can hang it from a tree branch.
That’s it! Your bird feeder is now ready to use. Be sure to refill it with bird seed as needed.
How do you make a preschool bird feeder?
Making a preschool bird feeder is a great activity to do with your child. It is simple to make and is a great way to teach your child about the birds that live in your area.
You will need:
-a piece of wood (about 6×6 inches)
-a drill
-a saw
-a screwdriver
-a screw (1 inch)
-a wire hanger
-a piece of string
-a bird seed mix
1. Drill a hole in the center of the piece of wood.
2. Saw the two ends of the wire hanger so that they are bent into a U-shape.
3. Screw the hanger into the hole that you drilled in the wood.
4. Cut a piece of string that is about 18 inches long.
5. Tie one end of the string to the screw on the hanger.
6. Fill the feeder with bird seed.
7. Hang the feeder in a tree or on a fence.
The birds will love the new bird feeder and will be sure to visit it often.
