Do you have a lot of circular knitting needles and no way to organize them? This easy circular knitting needle case pattern is perfect for you! This case can hold up to 12 needles, and it’s easy to make.
To make the case, you will need:
– A piece of fabric measuring 24” x 12”
– Two pieces of fabric measuring 9” x 6”
– One piece of fabric measuring 6” x 6”
– Coordinating thread
– A sewing needle
1. Cut the fabric according to the measurements listed above.
2. Sew the two 9” x 6” pieces of fabric together, right sides facing, using a ¼” seam allowance.
3. Sew the 6” x 6” piece of fabric to one end of the seam you just sewed, right sides facing.
4. Turn the case right side out.
5. Sew the other end of the seam.
6. Turn the case inside out.
7. Sew a line of stitching across the top of the case, about 1” from the edge.
8. Sew a line of stitching along each side of the case, about ½” from the edge.
Now your circular knitting needle case is ready to use!
Contents
- 1 How do you make a circular needle holder?
- 2 How do you make a knitting needle storage case?
- 3 How do you knit a circle with circular needles?
- 4 How do you knit a circular needle with a chunky blanket?
- 5 How do you carry yarn up rounds in a round?
- 6 How do you make a needle stopper?
- 7 How do you make a simple needle case?
How do you make a circular needle holder?
How do you make a circular needle holder?
There are many ways to make a circular needle holder, but here is one way that is simple and easy.
You will need:
-a piece of cardboard or posterboard
-a ruler
-a pencil
-a pair of scissors
1. Cut a piece of cardboard or posterboard that is 6 inches wide and 12 inches long.
2. Draw a half circle on the cardboard or posterboard that is 6 inches wide.
3. Cut out the half circle with the scissors.
4. Fold the half circle in half so that the two straight edges are together.
5. Staple the two edges together to create a circular needle holder.
How do you make a knitting needle storage case?
A knitting needle storage case is a great way to organize your knitting needles and keep them safe. You can make your own case out of a piece of cardboard or fabric.
To make a knitting needle storage case out of cardboard, you will need:
-a piece of cardboard, at least 12×12 inches
-a ruler
-a pencil
-a craft knife
-a cutting mat
-a straight edge
-a marker
-scissors
To make the case, draw a rectangle on the cardboard that is 12×6 inches. Cut out the rectangle using the craft knife and straight edge. Then, cut out a smaller rectangle that is 6×6 inches from the center of the larger rectangle. This will be the case that holds the knitting needles.
Decorate the front of the case with a design or your initials. You can also use a marker to write the size of the knitting needles that fit in the case.
To make a knitting needle storage case out of fabric, you will need:
-a piece of fabric, at least 12×12 inches
-a ruler
-a pencil
-a craft knife
-a cutting mat
-a straight edge
-a marker
-scissors
To make the case, fold the fabric in half so that it is 12×6 inches. Cut out the fabric using the craft knife and straight edge. Then, cut out a smaller rectangle that is 6×6 inches from the center of the larger rectangle. This will be the case that holds the knitting needles.
Decorate the front of the case with a design or your initials. You can also use a marker to write the size of the knitting needles that fit in the case.
How do you knit a circle with circular needles?
To knit a circle with circular needles, you will need to use the magic loop method. With this method, you will be knitting with one long circular needle, rather than two shorter circular needles.
To begin, cast on the desired number of stitches onto the circular needle. Then, slide the stitches to the middle of the needle.
Next, hold the needle with the stitches in your left hand, with the working yarn coming from the back of the work. Insert the right-hand needle into the first stitch on the left-hand needle, from front to back.
Wrap the yarn around the right-hand needle, and pull it through the stitch. You will now have two stitches on the right-hand needle.
Knit the second stitch on the left-hand needle, as you would a normal knit stitch.
Repeat these steps until you have knit all of the stitches on the left-hand needle.
Then, use the left-hand needle to pull the first stitch on the right-hand needle off the needle. This will create a loop, which will become the new beginning of the knitting.
Repeat these steps to knit the next circle.
How do you knit a circular needle with a chunky blanket?
When knitting a circular needle with a chunky blanket, you will need to use a circular needle that is at least 24 inches long. You will also need to use a chunky yarn.
To begin, cast on the required number of stitches onto the circular needle. Then, knit every stitch until you reach the end of the row.
Next, you will need to turn the work so that the wrong side is facing you. Then, knit the next row.
Repeat these steps until the blanket is the desired size.
Finally, bind off the stitches and weave in the ends.
How do you carry yarn up rounds in a round?
When working in the round, it’s important to be able to carry your yarn up the rounds without it getting tangled or creating a mess. Here are a few ways to do just that:
Method 1: The Wrap Method
This is the most common way to carry your yarn up rounds, and it’s pretty simple to do. Simply wrap the yarn around your index finger as you go up the round, and then let it unwrap as you go down the round. Make sure to keep the wraps tight so the yarn doesn’t unwind itself.
Method 2: The Crochet Method
If you’re already familiar with crocheting, this may be a better method for you. When you reach the end of a round, insert your hook into the next stitch and crochet over the tail of the yarn. Then, when you reach the beginning of the round, crochet over the yarn again to secure it.
Method 3: The Bead Method
If you’re using a lot of different colors in your project, this may be the best method for you. When you reach the end of a round, string a bead onto the yarn and then continue crocheting. When you reach the beginning of the round, string the bead back onto the yarn and crochet over it to secure it.
How do you make a needle stopper?
A needle stopper is a small, round object made of soft material that is placed on the end of a needle to keep the needle from piercing anything else after the needle has been used. Needle stoppers can be made from a variety of materials, including rubber, foam, or cork.
To make a needle stopper, start by cutting a small, round piece of rubber, foam, or cork. If using rubber, make sure to use a non-toxic type. If using foam, make sure to use a type that will not crumble. If using cork, make sure to use a type that will not crumble.
Next, using a sharp object, such as a needle or a toothpick, make a small hole in the center of the round piece of material.
Finally, insert the needle into the hole, and twist the needle to secure the stopper in place.
How do you make a simple needle case?
Making a needle case is a simple way to keep your needles organized and easy to find. This tutorial will show you how to make a basic case with a snap closure.
You’ll need:
– A piece of fabric measuring about 8″x10″
– A coordinating piece of fabric measuring about 2″x4″
– A snap fastener
– A needle and thread
1. Cut the fabric pieces. The 8″x10″ piece will be the main body of the needle case, and the 2″x4″ piece will be the flap.
2. Sew a straight line down the center of the 8″x10″ piece of fabric. This will be the fold line for the case.
3. Turn the fabric so the wrong side is facing out. Sew a straight line around the edge of the fabric, making sure to catch the edge of the fold. This will create a casing for the snap.
4. Sew a snap fastener to the fabric on the inside of the case.
5. Sew a line of stitching close to the edge of the flap piece of fabric.
6. Turn the fabric so the right side is facing out. Fold the flap piece of fabric over the top of the case, and press to secure. Sew a line of stitching close to the edge of the flap to hold it in place.
