Dr. Seuss hats are a fun and easy craft project for all ages. You will need a few simple supplies including some construction paper, a glue stick, scissors, and a stapler.
First, cut a large rectangle out of the construction paper. This will be the main part of the hat. Next, cut a small triangle out of the top of the rectangle. This will be the hat’s brim.
Glue the triangle to the top of the rectangle. Then, fold the bottom of the rectangle up to the top, and staple it in place.
Finally, cut a few strips of construction paper and glue them around the edge of the hat. You can also add a decorative band if you like. Let the glue dry completely before wearing your new hat!
Contents
How do you make a Dr Seuss hat at home?
Making a Dr. Seuss hat at home is a fun and easy way to show your love for the famous children’s book author. Not only is it a fun project, but it is also a relatively inexpensive one. Additionally, making a Dr. Seuss hat at home is a great way to show your creativity and craftsmanship.
There are a few different ways that you can make a Dr. Seuss hat at home. The first method is to use a basic cone-shaped hat as the foundation for your Dr. Seuss hat. To do this, you will need a piece of cardboard that is about 18 inches wide and 24 inches long. Cut the cardboard into a cone shape, making sure that the wide end of the cone is about 18 inches wide.
Next, you will need to make the brim of your Dr. Seuss hat. The easiest way to do this is by using a piece of fabric that is about 18 inches wide and 24 inches long. Cut the fabric into a rectangle shape, and then fold it in half so that the two long edges are facing each other. Sew the two long edges together, making sure to leave a space of about 2 inches at the top of the fabric.
Turn the fabric right-side out, and then place it around the top of the cone-shaped cardboard. Make sure that the fabric is positioned so that the two long edges are at the top of the cone. Sew the fabric to the cardboard, making sure to leave the space at the top open.
Next, you will need to make the tassels for your Dr. Seuss hat. To do this, you will need a piece of fabric that is about 18 inches wide and 24 inches long. Cut the fabric into a rectangle shape, and then fold it in half so that the two long edges are facing each other. Sew the two long edges together, making sure to leave a space of about 1 inch at the top of the fabric.
Cut the fabric into 18 inch long strips, and then tie them together at the top to form a tassel. Repeat this process until you have made enough tassels to cover the top of your Dr. Seuss hat.
Finally, you will need to attach the tassels to the top of your hat. To do this, simply glue them to the fabric that is around the top of the cone. Once the tassels are in place, your Dr. Seuss hat is finished!
How do you make a cat in the hat with a paper hat?
There are many different ways to make a cat in the hat with a paper hat. In this tutorial, we will be making a cat in the hat with a cone-shaped paper hat.
To make a cat in the hat with a paper hat, you will need:
– A cone-shaped paper hat
– A piece of construction paper in black
– A piece of construction paper in red
– A piece of construction paper in green
– A pair of scissors
– A glue stick
– A ruler
1. Cut a triangular piece out of the black construction paper, and glue it to the top front of the cone-shaped paper hat.
2. Cut a triangular piece out of the red construction paper, and glue it to the top back of the cone-shaped paper hat.
3. Cut a triangular piece out of the green construction paper, and glue it to the bottom front of the cone-shaped paper hat.
4. Cut a triangular piece out of the black construction paper, and glue it to the bottom back of the cone-shaped paper hat.
How do you make a easy paper hat?
Making a paper hat is a fun and easy project that can be completed in minutes. There are a variety of ways to make a paper hat, but this tutorial will show you how to make a simple paper hat that can be worn by adults or children.
To make a paper hat, you will need:
– A piece of paper (preferably a square or rectangle)
– A ruler
– A pencil
– Scissors
– Tape
1. Fold the paper in half diagonally, then unfold it.
2. Fold the top corner of the paper down to the bottom corner.
3. Fold the triangle that was created in step 2 in half, then unfold it.
4. Cut the triangle that was created in step 3 in half.
5. Take the two longest edges of the triangle that was created in step 4 and fold them in towards the center.
6. Tape the edges of the hat together.
Your paper hat is now complete!
How do you make a Dr. Seuss hat out of paper?
Making a Dr. Seuss hat out of paper is a fun and easy craft project that can be completed in just a few simple steps.
To make a Dr. Seuss hat, you will need:
– A sheet of paper
– A marker or pen
– Scissors
– Tape
1. Start by folding the sheet of paper in half so that it is in the shape of a cone.
2. Cut a small hole in the top of the cone, then use a marker or pen to draw a face on the front of the hat.
3. Cut the bottom of the cone off so that the hat is now in the shape of a cylinder.
4. Tape the two ends of the cylinder together to form the hat.
Your Dr. Seuss hat is now complete! Wear it with pride and enjoy the compliments from your friends and family.
How do you make a Dr Seuss hat out of paper?
Making a Dr. Seuss hat out of paper is a fun and easy project that can be completed in just a few steps. First, gather some supplies. You will need a piece of paper, a ruler, a pencil, scissors, and a glue stick.
Next, fold the paper in half width-wise, and then in half again. Draw a half-circle on the folded paper, using the ruler to help you make a perfect curve. Cut out the half-circle.
Turn the paper so the fold is facing down, and then glue the two cut edges of the half-circle together. Let the glue dry.
Flip the paper over so the fold is now on the top. Cut a small hole in the center of the folded edge.
Turn the hat inside out so the glued edges are on the inside. Curl the top edge of the hat downwards slightly, and then glue it in place. Let the glue dry.
Your Dr. Seuss hat is now complete!
How do you make a paper crown?
Making a paper crown is a fun activity for kids of all ages. It’s easy to do and doesn’t require any special skills or tools. Here’s how to make a paper crown:
1. Cut a strip of paper that is about 24 inches long and 1.5 inches wide.
2. Fold the strip of paper in half so that the long edge is parallel to the fold.
3. Cut along the fold to create two strips of paper that are each 12 inches long.
4. Unfold the strips of paper.
5. Take one strip of paper and fold it in half so that the short edge is parallel to the fold.
6. Cut along the fold to create two strips of paper that are each 6 inches long.
7. Unfold the strips of paper.
8. Take one strip of paper and accordion fold it so that it forms a long, narrow strip.
9. Tape the end of the strip to the other strip of paper to form a circle.
10. Cut out a small circle from the center of the circle.
11. Tape the ends of the circle together to form a crown.
12. Decorate the crown with stickers, glitter, or other embellishments.
How do you make a square newspaper hat?
Making a square newspaper hat is a fun, easy way to keep your head warm during the colder months. You can make this hat in any size, depending on the amount of newspaper you have on hand.
To make a square newspaper hat, you’ll need:
-Newspaper
-Scissors
-Tape
-Ruler
1. Cut a square of newspaper that is about twice the size of the hat you want to make.
2. Fold the square in half, then in half again.
3. Cut along the folded lines, making four equal triangles.
4. Unfold the hat and tape the edges together.
5. Cut a piece of tape and affix it to the top center of the hat.
6. Twist the top of the hat to form a point.
Your square newspaper hat is now ready to wear!
