A plastic bottle bird feeder is a great way to recycle old plastic bottles and help the birds at the same time. This easy craft project can be completed in a few minutes with a few basic supplies.
To make a plastic bottle bird feeder, you will need:
-One or more plastic bottles
-Scissors
-Pencil
-Ruler
-Paint or markers
-Nuts, seeds, or other bird food
1. Cut the top off of the plastic bottle.
2. Draw a simple bird shape on the bottle, or use a pre-made template.
3. Cut out the bird shape.
4. Use a marker to draw a hole for the bird feeder’s hanger.
5. Fill the bird feeder with nuts, seeds, or other bird food.
6. Hang the bird feeder in a tree or other place where birds can reach it.
Contents
How do you make a bird feeder out of plastic bottles?
Making a bird feeder out of a plastic bottle is a fun and easy way to attract birds to your backyard. You will need a few supplies including a plastic bottle, a utility knife, scissors, a drill, and a screwdriver.
To make the bird feeder, start by cutting the plastic bottle in half using the utility knife. Cut along the bottle’s seam so that both halves are the same size. Next, use the scissors to cut a small hole in the top of the bottle. This will be the hole that the birds will use to access the food.
Next, use the drill to make a hole in the bottom of the bottle. This hole will be used to attach the bottle to a post or tree. Finally, use the screwdriver to attach the two halves of the bottle together.
Once the bird feeder is assembled, fill it with bird food and hang it in a sunny spot in your backyard. The birds will love it!
How do you make a bird feeder out of a 2 liter plastic bottle?
There are many ways that you can make a bird feeder out of a 2 liter plastic bottle. One way is to cut the bottle in half, and then use the bottom half as the feeder. You can then use the top half as a cone-shaped roof for the feeder. Another way to make a bird feeder out of a 2 liter plastic bottle is to cut a small hole in the bottom, and then use the top half as the feeder. You can then use the bottom half as a cone-shaped roof for the feeder.
How do you make a bird house out of a bottle?
Making a bird house out of a bottle is a fun and easy project that can be completed in a few simple steps. The most important part of making a bird house out of a bottle is choosing the right bottle. Make sure to select a bottle that is big enough for a bird to fit inside of, but not too big or the bird will be able to escape.
Once you have selected the right bottle, the next step is to remove the label. Be careful not to remove any of the bottle’s adhesive, as this will be needed to attach the roof of the bird house. If the adhesive is removed, it can be replaced with a strong adhesive such as hot glue.
After the label has been removed, the next step is to cut a hole in the top of the bottle. The hole should be big enough for a bird to fit through, but not too big or the bird will be able to escape. The hole can be cut using a variety of tools, such as a knife, scissors, or a drill.
Once the hole has been cut, the next step is to attach the roof of the bird house. The roof can be made out of a variety of materials, such as wood, metal, or plastic. The roof should be big enough to cover the hole in the top of the bottle, and it should be attached using the adhesive that was left on the bottle after the label was removed.
Once the roof is attached, the bird house is finished and ready for use. The bird house can be placed in a variety of locations, such as in a tree, on a fence, or on a roof.
How do you make a bird feeder for a school project?
Making a bird feeder is a fun, easy project that can be completed in a few hours with a few simple supplies. The finished product is a great way to attract birds to your backyard and teach children about birds and their habits.
There are a number of ways to make a bird feeder, but all of them require a basic understanding of the birds you want to attract and what they like to eat. There are three main types of bird feeders: tube feeders, platform feeders, and suet feeders.
Tube feeders are the most popular type of feeder and are made from a tube of plastic or metal with a number of feeding ports. The ports are designed to hold a variety of bird food, such as seeds, nuts, or insects.
Platform feeders are simple, flat feeders that are designed to sit on the ground or a platform. They are typically made from wood or metal and can be filled with a variety of bird food, such as seeds, berries, or insects.
Suet feeders are designed to hold blocks of suet, a fatty meat that is a favorite food of birds. Suet feeders can be made from a variety of materials, such as wood, metal, or plastic, and can be hung from a tree or post.
Once you have chosen the type of feeder you want to make, the next step is to gather the supplies. The following supplies are needed to make a basic bird feeder:
– bird feed (seeds, nuts, suet, etc.)
– a tube, platform, or suet feeder
– a drill or screwdriver
– a saw (optional)
– a hammer (optional)
The construction of the feeder will vary depending on the type of feeder you choose, but all feeders require a hole to pour the bird food into. The hole can be drilled or screwed into the feeder, or it can be punched through with a hammer.
Once the hole is drilled or punched, the feeder can be assembled. For tube feeders, the top and bottom of the tube are attached with screws or a metal band. Platform feeders can be assembled with screws or nails, and suet feeders can be assembled with screws, nails, or a metal band.
Once the feeder is assembled, it is time to fill it with bird food. The type of bird food will vary depending on the feeder, but most feeders can be filled with a variety of seeds, nuts, or insects.
The feeder can now be hung in a tree or post and enjoyed by the birds in your backyard.
How do you make a bird feeder step by step?
Making a bird feeder is a fun and easy way to attract birds to your yard. You can make a bird feeder out of a variety of materials, but a simple and popular option is to use a plastic bottle.
To make a bird feeder out of a plastic bottle, you will need:
– A plastic bottle (preferably 2-liter size)
– A sharp knife
– A screwdriver
– A saw (optional)
– Bird seed
– A bowl or plate
– A funnel (optional)
Step One
Cut the top off of the plastic bottle using the sharp knife. Make sure to cut it off evenly so that the top is a flat surface.
Step Two
Flip the bottle over and use the screwdriver to make a hole in the bottom. The hole should be big enough for the bird seed to fall through.
Step Three
If you want, you can use the saw to cut several small slots around the top of the bottle. This will make it easier for the birds to get to the seed.
Step Four
Fill the bottle with bird seed.
Step Five
Place the bowl or plate underneath the bottle. This will catch the seed that falls out of the hole.
Step Six
If you want, you can use the funnel to make it easier for the birds to get to the seed.
Your bird feeder is now ready to use!
How do you make a bird feeder out of recycled items?
Making a birdfeeder out of recycled materials is a fun, easy way to help out your local feathered friends. Not only will you be providing them with a much-needed source of food, but you’ll also be doing your part to reduce waste.
There are many different ways to make a recycled birdfeeder, but the most common type is a simple feeder made out of a plastic bottle. To make one, you’ll need a clean, dry plastic bottle (preferably one that’s at least 2 liters in size), a sharp knife, some scissors, and a few other basic supplies.
First, cut the bottle in half using the knife. Be careful not to cut yourself! Next, use the scissors to cut a small hole in the bottom of the bottle. This is where the birds will be able to reach in and grab the food.
Finally, use the knife to cut several small slits in the top of the bottle. These slits will allow the birds to perch on the feeder while they eat.
If you’d like, you can also add a few decorations to your feeder, such as a few small beads or a colorful ribbon.
Once your feeder is finished, simply fill it with birdseed and hang it in a sunny spot. The birds will love it!
How do you make a bird feeder out of a 2 liter Coke bottle?
Making a bird feeder out of a 2 liter Coke bottle is a fun and easy project that anyone can do. All you need is a 2 liter Coke bottle, a knife, a drill, some wire, and some bird seed.
First, use the knife to cut the top off the Coke bottle. Then, use the drill to make a hole in the bottom of the bottle. Next, cut a piece of wire that is about 18 inches long. Twist one end of the wire around the top of the bottle, and the other end around the hole in the bottom of the bottle.
Finally, fill the bottle with bird seed and hang it in a tree. Birds will be able to eat the bird seed from the bottle, and they will also be able to perch on the top of the bottle.
