Water Bottle Bird Feeder Craft
This easy bird feeder craft is a great way to recycle water bottles and help the birds in your backyard.
What You’ll Need:
1 or 2 water bottles
Scissors
Yarn
Newspaper
Bird seed
Instructions:
1. Cut the top off the water bottle.
2. Cut the bottom off the water bottle.
3. Cut a small hole in the middle of the water bottle top.
4. Cut a large hole in the middle of the water bottle bottom.
5. Thread yarn through the hole in the top of the water bottle.
6. Tie a knot in the yarn to keep it in place.
7. Spread newspaper out on the ground.
8. Put bird seed in the bottom of the water bottle.
9. Hang the water bottle from a tree branch.
10. Enjoy watching the birds eat from your new bird feeder!
Contents
How do you make a squirrel proof bird feeder with a 2 liter bottle?
There are many ways to make a squirrel proof bird feeder, but this guide will show you how to make one using a 2 liter bottle.
You will need:
• 2 liter bottle
• Drill
• saw
•issors
• String
• Tape
1. Cut the top off of the 2 liter bottle using a saw.
2. Drill a hole in the bottom of the bottle.
3. Cut a small hole in the side of the bottle.
4. Thread a piece of string through the hole in the bottom of the bottle.
5. Tape the ends of the string together.
6. Hang the bird feeder from a tree or other sturdy object.
How do you make a bird feeder out of a Gatorade bottle?
Making a bird feeder out of a Gatorade bottle is a fun, easy way to help feed backyard birds during the winter. All you need is a Gatorade bottle, some wire, and a few other simple supplies.
To make a bird feeder out of a Gatorade bottle, first remove the label and rinse the bottle thoroughly. Next, cut a piece of wire about 18 inches long, and form it into a hanger by twisting the ends together. Then, use the wire to puncture two small holes in the lid of the Gatorade bottle.
Finally, fill the bottle with bird seed, and hang it in a tree or other sunny spot. The birds will love the easy access to food, and you’ll love watching them feast from the comfort of your own home.
How do you make a bird feeder out of a bleach bottle?
Making a bird feeder out of a bleach bottle is a fun and easy way to enjoy watching birds up close. You will need a few simple supplies including a bleach bottle, a drill, a screwdriver, some wire, and a bird seed mix.
Start by cutting the top off of the bleach bottle using a sharp knife. Drill a hole in the center of the bottle top and then use a screwdriver to make a hole in the center of the bottle bottom. Cut a piece of wire that is about 18 inches long and thread it through the hole in the bottle top. Twist the wire around the screwdriver to create a hanger.
Fill the bottle with bird seed and hang it in a tree or on a fence. The birds will be able to perch on the bottle top and feed on the seed.
How do you make a bird sugar water feeder?
Making a bird feeder is a fun and easy way to attract birds to your backyard. You can make a bird feeder out of a variety of materials, but one of the easiest and most popular types of feeders to make is a sugar water feeder.
To make a sugar water feeder, you will need a few supplies: a small container such as a jar or a plastic bottle, a small wooden dowel or stick, a drill, a screwdriver, wire, and sugar.
Drill a small hole in the bottom of the container. The hole should be just big enough for the dowel to fit through.
Using the screwdriver, make a hole in the top of the container. This hole will be used to hang the feeder.
Cut a piece of wire about 18 inches long. Twist one end of the wire around the dowel and the other end around the hole in the top of the container.
Fill the container with sugar and water. The sugar water should be about the consistency of iced tea.
Hang the feeder in a tree or somewhere else where birds can easily reach it.
Your sugar water feeder is now ready to use. Birds will love the sweet taste of the sugar water and will be sure to visit your feeder often.
How do you make a simple bird feeder out of a plastic bottle?
Making a bird feeder out of a plastic bottle is a fun and easy way to get closer to nature. Not only will you be providing food for our feathered friends, but you will also be creating a beautiful and decorative addition to your backyard.
To make a bird feeder out of a plastic bottle, you will need the following supplies:
-A clean and empty plastic bottle (preferably one that is at least 1 liter in size)
-A sharp knife or scissors
-A marker
-A ruler
-Plyers
-A screwdriver
-A small piece of wire
-Bird seed
1. Cut the top off of the plastic bottle using a sharp knife or scissors.
2. Use a marker to draw a small circle in the center of the bottle’s top. This will be the hole where the birds will access the bird seed.
3. Use a ruler to measure and mark four evenly spaced lines around the edge of the top.
4. Use plyers to curl the top of the bottle into a small funnel shape. You can also use your fingers to do this if you don’t have plyers.
5. Use a screwdriver to make a small hole in the center of the funnel.
6. Cut a small piece of wire and use it to twist it into a loop. This will be used to hang the bird feeder.
7. Fill the bottom of the bottle with bird seed.
8. Hang the bird feeder in a sunny spot and enjoy watching the birds feast!
How do you make a bird feeder out of a Coke bottle?
Making a bird feeder out of a Coke bottle is a fun and easy way to help feed the birds in your backyard. You can use any type of plastic bottle, but a Coke bottle is a good choice because it is sturdy and has a wide mouth.
To make a bird feeder out of a Coke bottle, you will need:
-A Coke bottle
-A knife
-A screwdriver
-A hammer
-Wire
-A screw
-A nut
First, cut the top off of the Coke bottle using a knife. Be careful not to cut yourself!
Next, use a screwdriver to make a hole in the bottom of the Coke bottle. The hole should be just big enough for the wire to fit through.
Then, use a hammer to make a hole in the side of the Coke bottle. The hole should be big enough for the screw to fit through.
Attach the screw to the nut and screw it into the hole in the side of the Coke bottle.
Thread the wire through the hole in the bottom of the Coke bottle and twist the ends together to form a hanger.
Your bird feeder is now ready to use!
How do you make a simple bird feeder water bottle?
Making a bird feeder water bottle is a fun and easy way to help birds stay hydrated during the hot summer months. You will need a few supplies including a water bottle, a drill, a bit that is the same diameter as the bottle’s neck, and some wire.
Drill a hole in the water bottle just below the neck. The hole should be big enough for the wire to fit through. Cut a piece of wire about 18 inches long. Bend one end of the wire into a loop. Pass the other end of the wire through the hole in the water bottle and form a loop on the other side.
The wire should now be able to hang from the bottle. Fill the bottle with water and hang it from a tree or other sturdy post. Birds will be able to drink from the bottle and bathe in the water.
